John Maddison’s Blog…

Cobra Master and more…

Clunk in Jaguar rear end

The jag rear end is susceptable to the outer fulcrum rods wearing, which gives the hub a little play and hence a clunk. Also it can cause a shudder when pulling off and make the car pull one way when accelerating and the other when braking.You need to check all the universals as well which can also cause “clunking”.I use a hypoid 90w and a limited slip additive (if you have an LSD” .Sometimes the big center nut on the axle will also come slightly loose (even with the pin) and may require a little shimming to get no play. Don’t just tighten these!
www.slitherclothing.com

Advertisements

July 1, 2007 - Posted by | Uncategorized

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: